One thing to do when buying a used car is to make sure the condition of the engine is good or not. Therefore it needs to be checked carefully, because there are so many that must be considered.

This must be done so that it is not like buying a ‘Cat in a sack’, you should check the machine by an expert. Unless knows the ins and outs of the machine is healthy or not.

Usually the most basic is to know the condition of the engine, listen to the sound on the engine, engine vibrations, exhaust fumes produced. And do not forget to check whether or not there is oil leakage in the engine. These steps are the main things that need to be considered to know the condition of a good car engine.

A good car engine, reduces your risk to make repairs, the other side saves costs,”

Which parts of the machine should be checked? To find a good and healthy car engine, there are 5 easy steps to find out the condition of the engine in a used car you want to buy. What are the parts that need attention?

Engine Oil Dose

To find out the volume of oil in the engine, it can be seen by the amount of oil available. This can be done checking by pulling the engine oil availability check lever, while knowing oil viscosity.

If the oil volume remains on the line, it is certain that the oil contained in the engine does not decrease due to friction that occurs inside the engine. Another thing, there is no oil leakage or seepage in the engine that causes the amount of oil to decrease.

Wall and Machine Bottom

Usually for cars with the age of 5 years and over, vulnerable to leakage or oil seepage in the engine. If you are interested in buying a used car, you should check this section.

Usually this happens on cylinder packing, where leakage often occurs in this section. At the bottom of the engine often occurs seepage due to oil, which is caused by the engine crankcase gasket that has begun to wear.

Radiator Water Does Not Spray When Opened

Finding a good car engine, as well as knowing the normal car engine cooler (radiator), can be done by opening the top lid of the radiator. To find a good radiator condition, do it by opening the radiator cap when the car engine is started.

If water does not spray violently upward when the radiator lid is opened, we can be sure that the radiator is in good and normal condition. If when the water is opened out loud, then there is a blockage in the radiator or water channel in the car engine.

This can happen because the crust that clogs the part, on the other hand causes the temperature of the car’s engine to heat up quickly. Black smoke, dark white, and issued water at the exhaust tip.

Check the Combustion Result from the Muffler.

If the exhaust fumes do not emit black or white smoke (gasoline cars), then the car engine is normal in general. If you see water coming out of the exhaust tip, you don’t need to panic.

Water that comes out at the end of the muffler occurs because of cold weather at night. This often happens because water vapor in the exhaust condenses at night and is pushed out when the engine is started.

Listen to the engine sound

The last step, which is to hear the sound of the engine directly is very important to note. If you feel the car engine does not make a noise or splatter when turned on, then there is a small possibility of damage occurs in the engine.

There are many things that cause the car’s engine to sound, including: the loose chain of the car’s, the valve that has to be reset, the piston handlebar that starts to weaken. It could also be piston or piston that has been scratched due to lack of oil lubricant, and coil settings that do not fit make the sound in the car engine also cause vibration in the engine.

Hopefully these tips provide information for those who want to buy a used car, with good quality and normal. So that later will not worry about how much more money must be spent for repairs, especially in the engine.